Product Description:

Bosch Rexroth Indramat presents the VPP40.3DEM-2G0NN-D2D-DN-NN-FW, an operator terminal from the VPP IndraLogic Terminals series. The unit serves as a human-machine interface for programmable logic controllers, letting maintenance staff and process engineers monitor lines or modify parameters through a projected-capacitive touch surface. By combining an industrial computer, integrated display, and field wiring points in one panel, it simplifies cabinet layouts and shortens commissioning time on automated assembly cells, packaging equipment, and material-handling stations.

The panel draws a nominal input of 24 VDC and tolerates fluctuations between 19 VDC and 30 VDC, so it aligns with standard control power buses without additional converters. At full load the electronics consume 160 W, a figure that guides power-supply sizing and thermal management inside sealed enclosures. Operators view process graphics on a 15 in TFT screen; its native 1024 × 768 resolution accommodates detailed mimic diagrams while keeping icons comfortably legible. The front surface carries a rugged IP65 rating, blocking dust and low-pressure water jets when the panel is flush-mounted on a door or console. These characteristics combine visual clarity with environmental shielding needed in paint booths, food plants, or machining cells.

Field connectivity is handled through 2 independent Ethernet ports for segregated control and diagnostic networks, while application peripherals such as barcode readers or flash drives attach to 7 USB ports on the backplane. The housing spans 407 mm in width and 370 mm in height, with a depth of 117 mm, so the required cut-out can be prepared before wiring. Rear ingress protection meets IP20 because this side resides inside the cabinet. Four PCI slots remain available for motion cards or specialty I/O, and overall power margins can be checked against the 19–30 VDC window to maintain stable operation during brown-outs.