Product Description:

The VPP40.3BIM-2G0NN-D4D-FN-NN-FW operator terminal is produced by Bosch Rexroth Indramat within the VPP IndraLogic Terminals series. Serving as the primary human-machine interface in an IndraLogic control cell, the unit integrates computing, visualization, and manual input so operators can issue commands and observe process data from a single panel. It combines a 15-inch TFT screen with keyboard operation, making it suitable for machine fronts where continuous status feedback and direct keystroke entry are required. The integrated format also reduces the need for separate display and control hardware at the machine.

At the heart of the terminal is a Core i5-520M processor that runs at 2.4 GHz, providing sufficient performance for logic execution and SCADA graphics. The system carries 2 GB of memory, which stores the runtime, fieldbus drivers, and user programs. Visual output appears on a 38.1 cm (15") TFT display driven at 1024 × 768 pixels, and the panel renders up to 16 million colors so alarm states and trend curves remain easy to distinguish. A sealed aluminum bezel with IP65 front protection allows washdown cleaning without liquid ingress at the front of the unit. Keyboard operation provides tactile input, and four PCI slots accommodate motion cards, fieldbus masters, or additional I/O modules.

Mechanical dimensions support cabinet integration: the housing is 407 mm wide, 370 mm high, and 117 mm deep, yet the enclosure weighs only 7.2 kg, easing swing-arm mounting. Internal electronics draw 160 W from a regulated 24 V DC supply, so the power budget can be shared with other low-voltage automation devices. Thermal output is low for a fanless panel PC, which helps limit dust intake and reduces routine cleaning needs around the cooling path. The depth leaves clearance for rear ventilation even when the four PCI slots are populated. Rear access also leaves room for cable routing and expansion card connections inside the cabinet.