Product Description:

The VPP40.3BIM-2G0NN-D2D-DN-NN-FW is a machine-mount operator terminal produced by Bosch Rexroth Indramat within the VPP IndraLogic Terminals series. It serves as the human-machine interface in automated lines, allowing operators to supervise process variables, react to faults, and issue control commands to connected PLCs through integrated Ethernet links. By combining a full-color screen, tactile keys, and an embedded IPC in a unified enclosure, the device provides a centralized interaction point that reduces cabinet components and shortens field wiring.

The panel features a 38.1 cm (15") diagonal TFT display that delivers crisp images at 1024 × 768 pixels. Graphics, trends, and mimic diagrams appear in 16 million colors, which aids in distinguishing states and alarm levels. An anodized aluminum front bezel carries an IP65 rating, so washdown and dust-laden environments do not compromise the viewing area or the foil keys. One front-mounted USB 2.0 port permits quick transfer of recipes or data, while six rear USB ports and a dedicated VGA service connector support local service equipment. During operation, the internal electronics draw up to 160 W, a figure that guides sizing of the 24 VDC supply and cabinet heat removal.

The housing measures 370 × 407 × 117 mm and weighs 7.2 kg, making it suitable for articulated arm or pedestal mounting without excessive load on the support structure. A regulated input of 24 V DC powers the CPU, display backlight, and four available PCI slots for fieldbus or motion cards. Network connectivity is handled through 2 x Ethernet TCP/IP ports that allow simultaneous access by the control network and an engineering workstation. Rear surfaces meet IP20, so the unit is installed with its back inside a protected cabinet section, and foil keys provide reliable tactile input while resisting cleaning chemicals.