Product Description:

The VPP40.3BIL-1G0NN-D1D-DN-NN-FW operator terminal is produced by Bosch Rexroth Indramat within the VPP IndraLogic Terminals series. Designed for machinery supervision, the unit combines display output and keyed input so operators can issue commands, monitor axis states, and adjust parameters directly at the line. Its role in industrial automation is to present real-time process data and forward operator actions to the controller, reducing latency compared with remote PCs. Mounted in a control cabinet door, it interfaces with drive, logic, and safety networks through integrated communication hardware while maintaining a compact 15-inch-class footprint.

Visual output is handled by a 15 in TFT panel with a resolution of 1024 × 768 pixels and support for 256,000 colors, providing sufficient clarity for diagnostic trends and alarm dialogs. Beneath the bezel, a Core Duo L2400 1.66 GHz processor executes IndraLogic runtime code, while 1 GB RAM buffers variables and graphics. The electronics block draws 160 W from the 24 VDC cabinet supply, and two PCI slots are available for additional fieldbus or motion interfaces. A rear VGA connector supports an external monitor for maintenance use. Keyboard operation is implemented through a matrix of 16 function keys, 16 machine keys, and 14 additional keys, giving one-touch access to frequently used commands without navigating hierarchical menus.

Data exchange with higher-level networks is provided through 2 × Ethernet TCP/IP ports, and auxiliary peripherals such as scanners can be attached through a 6 USB 2.0 + 1 front USB service connection. Mass storage is provided by an 80 GB HDD that holds the operating system, recipe files, and event logs. The enclosure carries front IP65 and rear IP20 protection, so the screen and keypad resist dust and low-pressure water while the electronics compartment vents inside the cabinet. This layout keeps the operator side protected while allowing the internal section to remain suited for cabinet installation.