Product Description:

The VPP40.3BIK-4G0NN-D5D-HN-NN-FW is an operator terminal produced by Bosch Rexroth Indramat for the VPP IndraLogic Terminals series. This panel combines visualization and control in a single enclosure, enabling direct machine interaction through its integrated keyboard and onboard PC hardware. In an automation cell, it functions as the local HMI and embedded controller, running application logic, managing network traffic, and collecting user commands while fitting into control cabinets that require protection on the production floor.

At the heart of the unit, an Intel Core i7-620M processor running at 2.66 GHz executes PLC code and visualization tasks without separate CPUs. The processor is paired with 4 GB of DDR3 RAM, providing sufficient volatile memory for deterministic multitasking and large project files. A 100 GB SSD is installed for fast boot times and low-vibration data storage, which is useful on equipment with constant motion. Operators view process data on a 38.1 cm (15") TFT display driven at 1024 × 768 pixels, yielding an XGA workspace for diagnostics, alarm lists, and recipe handling. These hardware elements help keep scan times low even when animated graphics are rendered.

The electronics are powered from a 24 V DC source, letting the terminal share the control cabinet’s low-voltage rail. Under full computational load and backlighting demand, it draws up to 160 W, a figure that helps with cabinet cooling and power supply sizing. The aluminum front carries an IP65 rating so washdown water jets or airborne dust cannot enter, whereas the rear section remains at IP20 because it is enclosed inside the cabinet. Two Ethernet TCP/IP ports, seven USB 2.0 connectors, a VGA output, and one PCI slot support fieldbus gateways, data logging, and expansion cards, while the fixed keypad simplifies operation on vibration-prone machinery.