Product Description:

The VPP40.1DEC-1G0NN-M1C-BE-NN-FW is an operator terminal manufactured by Bosch Rexroth Indramat within the VPP IndraLogic Terminals series. Intended for machine-level visualization and control, the unit merges a display, touchscreen, and embedded computer so PLC sequences and motion data can be observed and adjusted directly on the factory floor. This integration reduces panel wiring by replacing separate keyboards, monitors, and PCs with a single sealed interface for automated filling lines, packaging stations, and material-handling cells.

The front interface uses a 15 in active-matrix TFT panel that renders graphics at 1024 × 768 pixels and up to 256,000 colors, giving operators clear process trends and alarm pop-ups. A resistive touch layer accepts finger or stylus input, removing the need for external keys. The exposed surface carries IP65 protection, so the terminal can be mounted on washdown enclosures without added hoods. Its RAL 7035 gray bezel matches common control cabinets and limits glare under shop lighting. An internal sensor issues a temperature alarm at 50 °C so supervisory software can react before the electronics exceed safe limits.

Behind the screen, the system board accepts expansion cards up to 180 mm long; one ISA slot is reserved for legacy I/O while 4 PCI sockets handle fieldbus or data-logging adapters. Mechanical dimensions keep retrofits straightforward: the aluminum bezel spans 407 mm in width, 371 mm in height, and is only 5 mm thick, allowing shallow door cutouts. A USB service port sits behind an IP65-rated cover so memory sticks can be attached without breaking the seal. When the temperature alarm reaches its threshold, the panel can perform an orderly shutdown while the touchscreen remains responsive, so operator commands can still be captured during cooling procedures.