Product Description:

The industrial interface identified as VPP40.1DEA-1G0NN-M1C-BN-NN-FW is manufactured by Bosch Rexroth Indramat within the VPP IndraLogic Terminals series. It functions as a panel PC that combines visualization and operator input so motion controllers, PLCs, and drives can be supervised directly at the machine. By integrating computing hardware with a sealed front panel, the unit provides a compact way to issue commands and view status data in real time.

A 15 in TFT display serves as the viewing surface, and the screen is operated through a touch screen layer that removes the need for an external keyboard during routine use. Network integration is handled through a single 1 x RJ45 (10/100 Base-T) connector, allowing standard Ethernet cabling to link the terminal to higher-level systems. The electronics draw up to 200 W maximum, so the supply can be sized for peak load. Application code, the operating system, and runtime data are buffered in 512 MB of working memory, which gives the terminal room for HMI graphics and logic tasks. The aluminum front is rated IP65, protecting the display and touch layer against dust and low-pressure water jets during washdown cycles.

The mechanical enclosure measures 371 mm in height and 407 mm in width, with a front-panel thickness of just 5 mm, so it sits nearly flush when mounted in a door cutout. Behind the sealed face, the PC box carries an IP00 classification because it is intended to operate inside a protected cabinet. Expansion is possible through two PCI slots and one shared PCI/ISA slot, while two 9-pin RS232 serial ports support legacy devices. Peripheral connections include two Type A USB ports for removable media and a 15-pin HD-Sub VGA socket for an external monitor. This combination supports both network-based control links and older serial peripherals on the same terminal.