Product Description:

The VPP40.1DEA-1G0NN-M1C-BE-NN-FW operator terminal is manufactured by Bosch Rexroth Indramat as a member of the VPP IndraLogic Terminals series. It functions as a human-machine interface for visualization and command entry inside automated cells and machine lines. A 15-inch TFT panel forms the active surface, and interaction is performed solely through its touchscreen, removing the need for mechanical keys. By integrating process graphics, parameter input, and alarm acknowledgment on one panel, the unit streamlines controller communication and on-site diagnostics.

Graphical clarity is delivered by a native resolution of 1024 x 768 pixels, letting detailed status screens render without resampling. Color fidelity reaches 256,000 colors, so gradients and warning highlights remain distinct on process synoptics. The terminal draws up to 200 W under peak load, a figure that matters when sizing enclosure power budgets. Video duplication to an external display is supplied through a 1 x 15-pin HD-Sub VGA connector, while the front face resists dust and water jets to IP65. Two RS-232 links, one 25-pin parallel connector, and two USB Type-A receptacles are present for barcode readers, legacy printers, or data storage devices.

The housing profile measures 371 mm high and 407 mm wide, allowing installation in panel cutouts prepared to standard machining tolerances. Internal expansion is provided by 3 slots for option cards, and an external battery port maintains the real-time clock or recipe data during power loss. Network coupling to PLCs or supervisory computers is handled through 1 x RJ45, 10/100 Base-T Ethernet operating in half-duplex or full-duplex modes. This arrangement supports machine-level visualization while keeping common communication and expansion connections available at the terminal.