Product Description:

The VPP16.3BKK-1G0NN-D1D-DN-NN-FW is an operator terminal produced by Bosch Rexroth Indramat within the VPP IndraLogic Terminals series. It combines an integrated computer with a 12-inch touch display and fixed function keys to serve as a human-machine interface for automated machinery. Using this terminal, a PLC or motion controller can present status data, accept operator commands, and perform local visualization without a separate industrial PC.

The unit is driven by a 1.66 GHz Intel L2400 processor and is supported by 1 GB of DDR RAM, giving it sufficient headroom for control tasks, trending, and recipe handling. Graphics are rendered at 800 × 600 pixels on the 30.5 cm screen, a format that balances legibility with limited panel real estate. Seven USB 2.0 receptacles, highlighted by the count 7 × USB 2.0, allow scanners, memory sticks, or service tools to be attached without hubs. Two Ethernet TCP/IP ports offer redundant or segmented network paths for plant-wide communication, while a single PCI slot permits installation of a fieldbus or specialized motion card. Sixteen discrete function keys and an equal number of machine keys provide hardwired shortcuts, and an additional 14 soft-labeled keys support context-sensitive input.

The terminal operates from a 24 V DC supply and draws up to 160 W, so cabinet power planning must account for both logic and backlight consumption. Its aluminum front bezel carries a IP65 rating, protecting the touchscreen and keys against dust ingress and low-pressure jets, whereas the rear electronics section is limited to IP20. An 80 GB HDD stores the operating system and application files, and the internal architecture reserves one PCI bay for expansions that cannot run over USB or Ethernet. Finally, the panel offers 16 function keys, 16 machine keys, and 14 additional soft keys to streamline repetitive operational sequences in manufacturing lines.