Product Description:

The VP21.1BQD-512D-P7D-NNNN operator terminal belongs to the VPP IndraLogic Terminals series manufactured by Bosch Rexroth Indramat. It combines a keyed front panel with an embedded controller so operators can view machine status, enter commands, and exchange data with IndraLogic PLCs over field networks during routine machine use. By integrating the display, keypad, and communication interfaces in one housing, the unit serves as the human-machine interface in automated cells that require local supervision and direct I/O signaling at the machine.

Its visual section is built around a 14-inch diagonal screen that uses TFT technology for clear color rendering at a resolution of 1024 x 768 pixels. The sealed front bezel has a protection class of IP 64, allowing wipe-down cleaning, while the rear enclosure remains IP40. Internal electronics run on a nominal supply of 24 VDC, and the listed 2.0 A input current keeps the terminal within low-voltage safety directives. This arrangement supports installation inside control cabinets without additional step-down converters, and the membrane keys work with the display to provide quick access to machine parameters and alarm pages.

Communication and auxiliary control are handled by 2 Ethernet ports for plant networks, a RS232 (UART 16550) serial channel for legacy devices, and a single USB receptacle for data backup. Two transistor digital outputs can drive status lamps, and the ready contact is rated 0.5 A at 30 VDC for controller interlock loops. The keyboard offers 57 keys to speed up setup routines. During operation, the assembly dissipates up to 48 W, and its cast-aluminum frame brings the overall mass to 11.00 kg. The unit is intended for direct mounting on panel doors, where the front display and keypad remain accessible during machine operation.