Product Description

The VPB40.4D2N-16GNN-D8D-HN-NN-FW control cabinet PC that is manufactured by Bosch Rexroth does not have any special interface connection. This PC has a memory capacity of 16GB RAM. It also comprises a power consumption of 150W. The unit can be connected to two operator displays that have the same version and resolution using a splitter. The solid-state drive of the device has a higher temperature resistance and shock resistance when compared to that of a normal hard disk. The system must be stored and transported between -20°C and 60°C. The PC comes with an overvoltage category of 2 in adherence with EN 60664-1 specifications.

It should be checked before installation that the air surrounding the control cabinet PC is free of metal vapors, salts, acids, corrosive agents, and alkaline solutions. There must also be no radio interference when the product functions in residential areas or small enterprises. The device comprises a Core i7-6820EQ processor that has a clocking frequency of 2.8GHz. The unit has one PCI slot and one PCIe slot. The cards inserted in these slots should not exceed 175mm in length. There must be a direct functional earth connection between the system and the operator display whenever possible. It comprises six Type A four-pin USB sockets for connecting the USB interfaces. These ports are always monitored as two ports at a time.

The product should be connected to only those USB devices that comply with the noise immunity as per EMC directives. The system supports connectivity to an HDMI monitor, a DVI monitor, or a DisplayPort interface at its XDP connector using an adapter. The interface cables must not be routed parallel to a noise source. The external modules of the unit should be fitted before the PC is mounted inside the control cabinet. This control cabinet PC can be shipped through our logistics partners with a one-year Wake Industrial warranty.