Product Description:

The VPB40.4D2L-16GNN-D8D-HN-NN-FW is a control-cabinet PC unit manufactured by Bosch Rexroth Indramat for the VPB IndraControl PC Units series. As a compact industrial computer, it supplies the processing, fieldbus handling, and visualization required for machine-level automation. It is used with compatible operator panels and drive controllers.

An integrated Intel Core i7-6820EQ running at 2.8 GHz handles deterministic control tasks, while 16 GB RAM supports large PLC programs and HMI graphics without paging delays. Six front-side Type A receptacles provide 6 USB ports for service dongles, data logging, or camera inputs, and two shielded RJ45 jacks give the system 2 Ethernet ports for segmented networks or redundant ring topologies. Two internal expansion slots accept add-on cards. The form factor stays within the Control Cabinet PC profile so the unit slides into 19-inch enclosures using the specified M5 mounting screws. All cabling exits through connector X10 for 24 V supply power, and RJ45 terminations simplify remote diagnostics. The front bezel carries a DisplayPort socket for digital video, allowing direct attachment of VDP15.3, 16.3, 18.3, 21.3, or 40.3 operator displays without signal converters.

The electronics draw their logic power from a 24 V DC source, reducing heat dissipation compared with line-voltage PCs. Control and I/O data move across the Intel QM170 chipset, which supports PCIe communication to daughter cards up to 175 mm long inside the available slots, so motion cards or additional NICs fit without protruding past the housing. A locking DisplayPort connection, highlighted here as DisplayPort, transfers high-resolution process screens to the selected VDP operator display. Remaining interfaces include the RJ45 Ethernet connector, Type A USB jacks, and a keyed X10 power plug, forming a single package that consolidates computing, networking, and visualization in the control cabinet.