Product Description

Bosch Rexroth provides worldwide services in the manufacturing and maintenance of small operator terminals, controls, and servo motors for different automated processes in industries. The company’s main concern is about Customer satisfaction.

The VCP11.2DWN-003-PB-NN-PW model can operate through a DC 24V power supply with 10% of maximum residual ripple. The small operator terminal VCP 11 comes with Ethernet (X5), PROFIBUS DP (X6), and USB (X9, X10) interfaces. The power consumption of the device is 0.25 A at 24V with the maximum power consumption of 0.35 A at 6W of the connected load. The enclosure of the model is manufactured by galvanized steel sheet and anodized aluminum is used for the production of the front panel. The front panel cover is made up of polyester foil and the rear side of the device is protected by IP 20 protection class whereas, the front side of the device is protected by IP 65 protection category. The small operator terminal VCP 11 is equipped with 3.8 inches FSTN display which provides 320 × 240 pixels resolution and a resistive 4 wire analog touch screen unit that allows operating the application software via the touch-sensitive surface of the display.

The model VCP11.2DWN-003-PB-NN-PW comes with a 10/100 Base-T Ethernet interface which is located on the side of the operating device and can take a connection through an RJ45 female connector which is attached to a twisted-pair cable of category 6+ having a maximum length of 100 meters. The model has two host interfaces (X9, X10) and a PROFIBUS DP interface is used to operate different sensors and actuators through a centralized controller. The model comes with RISC ARM9 central processing unit having 200 MHz of clock frequency and 3 MB application memory. The device can operate ideally between the ambient temperature ranges of +5 to +45 degree Celsius and it is protected by the 3K3 climatic category. This unit can be shipped globally with a one-year warranty period from Wake Industrial.