Product Description

The VCP05.1BSN-RS-NN-PW small operator terminal from Bosch Rexroth is one of the several VCP series terminals from the manufacturer. This small operator terminal has a line code of 05 and a design code of 1. This product performs the functions of a machine operator terminal that is capable of initiating the application related functions in the machine. The device supports a compact design and supports mounting in any orientation. It features a polyethylene foam seal around its back that makes it suitable for all applications. The unit features a keypad with 30 keys on the front panel. The keyboard encompasses a 4mm aluminum plate along with tapered edges and has a chemical-resistant polyester foil covering plus embossed key areas.

This terminal is loaded with a special operating system. The product must always be connected to the voltage supply and also to the field bus system if needed. This device should be used only after reading and understanding the associated safety instructions. Its housing encompasses a sheet made of galvanized steel. The unit has a weight of approximately 500g. The display comes equipped with the ability to depict 4 x 20 characters. The unit cannot be upgraded. The operator terminal is fitted with a TTY 20mA RS232/485 serial interface. Its firmware must be procured as a separate subitem.

The product is designed to be used in single or multiple-axis control tasks. The device assembly, installation and operation should be performed only under the specified ambient conditions. Its front panel has an IP 54 degree of protection while the rear features an IP 20 degree of protection. The front panel is made of varnished aluminum. The special keys have a size of 15.6 x 17mm (H x W) while the function keys are sized at 16 x 17mm (H x W). The VCP05.1BSN-RS-NN-PW operator terminal can be sent to your address with one year warranty.