TFM 4.1-050-300-W1-220

Product Description:

Bosch Rexroth provides worldwide assistance in the manufacturing and maintenance of different industrial automation products. The company’s products such as variable frequency drive, servo motors, and converters are generally used around the globe.

The TFM 4.1-050-300-W1-220 model operates at the rated voltage of 300 VDC, along with ±15% tolerance, which is supplied by the respective drive controller. The TFM variable frequency drive provides high operational reliability when used in conjunction with the electrical motors. The drive is capable of controlling the speed of the motor by changing the input frequency of the supplied voltage. If the motor is required to operate at a high speed then the drive will ramp-up the input frequency and similarly, the drive will ramp-down the input frequency to operate the motor at low speed. The TFM variable frequency drive is highly recommended by its users around the globe, due to its cost-effective and energy-efficient operation. The TFM variable frequency drive operates at the maximum current of 50 A, and it uses forced convection for cooling purposes. The drive is insulated by insulation class F as per DIN VDE 0110.

The model TFM 4.1-050-300-W1-220 is supplied with a one-year replacement warranty from Wake Industrial and can be shipped globally through trusted delivery agents. The ambient conditions on which the drive can operate without a reduction in rated data are +5 to +45 degree Celsius of operating temperature, a maximum humidity level of 75%, and maximum installation altitude of 1000 meters above sea level. A 220V heat sink blower unit is installed in this model for cooling purposes. The operating frequency of the blower unit is 50/60 Hz. The service life of the motor can be increased by using the variable frequency drive. The drive will provide protection against the 12.5 mm dust particles but it is not protected against liquids due to its IP 20 protection rating.