TDM3.2-030-300-W0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911962602
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat TDM3.2-030-300-W0 is part of the TDM Servo Drive Modules series and features natural convection cooling and an IP10 protection rating. It operates at a link circuit voltage of DC 300 V with a type current of 30 Amps and can withstand ambient temperatures up to 55 degrees Celsius.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The TDM3.2-030-300-W0 servo drive module is produced by Bosch Rexroth Indramat within the TDM Servo Drive Modules series. The unit converts rectified link voltage into three-phase output for servomotors, matching amplitude and frequency to motion commands from a higher-level CNC or PLC. The control stage handles inner current loops independently, so the motion controller can focus on trajectory generation. By regulating motor current in real time, the module supports precise positioning, stable speed control, and rapid acceleration in packaging lines, material-handling gantries, and general-purpose machining centers.
It removes heat through natural convection, so vertical airflow around the chassis must remain unobstructed. The link circuit is maintained at DC 300 V, and the control electronics remain active during mains variations of up to ±15%. Components rated to Class F withstand the humidity and condensation commonly found on factory floors. Continuous operation is supported at ambient temperatures up to 55 °C, while the enclosure carries an IP10 rating that helps protect against accidental contact with live parts while keeping ventilation openings available. For that reason, the housing uses perforated metalwork that is finger-safe and still allows the required chimney effect.
The transistor bridge can deliver a steady 30 A to the motor phases, providing the current needed for sustained servo operation. Connector X43 supplies auxiliary power, including +24 V at 50 mA for logic circuits and symmetrical ±15 V lines that provide 15 mA each for analog sensors. Reliable convection cooling is supported up to an installation altitude of 1000 m, and greater heights may require derating or added airflow. These auxiliary outputs support connected control and feedback devices without requiring a separate low-power supply at the drive.
Frequently Asked Questions about TDM3.2-030-300-W0:
Q: What is the cooling method used in the TDM3.2-030-300-W0 servo drive module?
A: The TDM3.2-030-300-W0 utilizes natural convection for cooling, operating without external fans.
Q: What is the type current rating for the TDM3.2-030-300-W0?
A: This module has a type current of 30 A, suitable for supporting moderate servo loads.
Q: What link circuit voltage is specified for the TDM3.2-030-300-W0 module?
A: The TDM3.2-030-300-W0 is designed to operate at a link circuit voltage of DC 300 V.
Q: What is the maximum ambient temperature for the TDM3.2-030-300-W0?
A: This device supports operation in environments with a maximum ambient temperature of 55 °C.
Q: What level of protection does the TDM3.2-030-300-W0 have against external elements?
A: The TDM3.2-030-300-W0 provides a protection rating of IP10, offering limited protection against solid objects.
