Product Description:

The TDM2.1-030-300-W1-00 is a servo drive module manufactured by Bosch Rexroth Indramat as part of the TDM Servo Drive Modules series. The unit converts rectified mains power into controlled three-phase output that synchronizes with feedback from the connected motor, allowing closed-loop positioning and speed control on packaging, printing, and material-handling lines. Within an automation cabinet, the module occupies a single slot and links to upper-level motion controllers, forming the power stage that directly influences servo performance. This arrangement separates the motion-control functions from the motor power stage while keeping axis response tightly regulated.

The module has continuous, peak, and type current ratings of 30 A. This allows the connected motor to draw the same maximum armature current during steady-state motion and brief acceleration events. Under these conditions, the drive can deliver up to 9 kW of mechanical power while its internal bus is stabilized at 300 VDC. A built-in axial fan removes heat and draws only 30 VA from the auxiliary supply, minimizing demand on the cabinet control transformer. Protection against accidental contact is classified as IP10, indicating finger-safe openings without further sealing.

Power dissipation at full load is 190 W, a value used for cabinet airflow calculations so component temperatures stay within the stated ceiling of 55 °C. The drive maintains rated output up to a mounting height of 1000 m above sea level and meets Humidity Class F for operation in 95% relative humidity without condensation. This operating range is intended for indoor industrial locations where moisture can be present without forming water on energized parts. Control electronics are supplied by ±15 V rails that draw 60 mA on the negative leg and 140 mA on the positive leg, and the assembly weighs only 10 kg, which keeps handling manageable during installation.