TDM1.2-30-W0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat TDM1.2-30-W0 is a servo drive module in the TDM Servo Drive Modules series. This module has a continuous current of 25 Amps and supports a peak current of 30 Amps, with continuous power output of 9 kW. It features natural convection cooling, weighs 9 kilograms, and operates with a 300 VDC link circuit voltage.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The TDM1.2-30-W0 is a servo drive module produced by Bosch Rexroth Indramat within the TDM Servo Drive Modules series. It serves as the power and control interface between the supply section and a compatible Indramat servo motor, converting DC link energy into regulated three-phase output for positioning and speed-control tasks. The compact chassis supports cabinet installation in automated machinery where space efficiency and controlled motor operation are important. Its drive electronics are built to support stable motion control across a range of industrial axis applications.
This module delivers a continuous motor phase current of 25 A, which supports a rated power of 9 kW. Energy is supplied from a shared DC bus operating at 300 VDC ±15%, and the internal power stage converts that input into controlled motor output while monitoring overcurrent and undervoltage conditions. Heat is removed by natural convection, so unobstructed cabinet airflow is necessary for proper thermal performance. When the drive is unloaded, power loss is limited to 160 W, which is useful when estimating enclosure heat dissipation. The module can also handle short-term peak current during acceleration, and its auxiliary ±15 V rails support both external signaling and internal electronics. Category C insulation separates live conductors from the chassis to withstand the DC bus potential.
The unit can operate at ambient temperatures up to 55 °C and at installation elevations up to 1000 m above sea level. Its enclosure has an IP10 rating, so the module should be installed inside a protective cabinet to limit exposure to dust and accidental contact. With a transport weight of 9 kg, the module remains manageable during installation and equipment handling. These operating limits make it suitable for enclosed industrial control cabinets where basic physical protection is provided by the surrounding system.
Frequently Asked Questions about TDM1.2-30-W0:
Q: What is the continuous current rating of the TDM1.2-30-W0 servo drive?
A: The TDM1.2-30-W0 servo drive module offers a continuous current rating of 25 A for sustained operation.
Q: How much continuous power can the TDM1.2-30-W0 provide?
A: The maximum continuous power output of this model is 9 kW.
Q: What cooling method is used in the TDM1.2-30-W0?
A: This drive uses natural convection as its cooling method and does not require external fans.
Q: What is the link circuit voltage for the TDM1.2-30-W0 servo drive?
A: The TDM1.2-30-W0 operates with a link circuit voltage of 300 VDC, with a tolerance of ±15%.
Q: What is the protection type of the TDM1.2-30-W0 drive module?
A: This model is protected to IP10 standards, providing minimal protection against solid objects.
