TDM1.2-030-300-W1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat TDM1.2-030-300-W1 is part of the TDM Servo Drive Modules series and weighs 10 kilograms. It provides a continuous current of 30 Amps with continuous power output of 9 kW, using forced ventilation cooling. This drive operates with a link circuit voltage of 300 V and has an IP10 protection rating.
Internal Product Review
The TDM1.2-030-300-W1 is a Bosch Rexroth Indramat servo drive module with 30 A continuous current and 9 kW continuous power. Forced ventilation and a 300 V link circuit support dependable motion-control performance, making the module a strong choice for sustained servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat builds the TDM1.2-030-300-W1 as part of the TDM Servo Drive Modules series. The module functions as a DC link supply and power stage for servo motors used in automated presses, packaging lines, and handling systems. It translates incoming link voltage into controlled three-phase output to regulate motor torque and speed.
The drive can deliver a continuous output of 30 A, enabling it to support medium-frame motors that draw steady current during sustained motion profiles. Its thermal design permits a continuous power throughput of 9 kW, so axis groups that demand several kilowatts of mechanical power can be supported without derating. A stabilized link circuit of 300 V (±15%) feeds the internal inverter, and this voltage level balances motor performance with manageable insulation stress. Cooling air is moved through the heat sink by forced ventilation, allowing full current at elevated cabinet temperatures without requiring oversized cooling surfaces. Internal switching and control components dissipate 190 W as heat during nominal operation, a figure that must be considered when sizing cabinet exhaust fans and power supplies.
The module operates at ambient temperatures up to 55 °C without duty-cycle reduction. It can be mounted at elevations reaching 1000 m above sea level before additional cooling margins are required. The housing carries an ingress rating of IP10, indicating basic finger protection but requiring placement inside a closed electrical cabinet for dust and splash shielding. With a transport mass of 10 kg, the unit remains manageable during installation and provides mechanical stability on DIN rails or panel plates. Auxiliary electronics draw 140 mA at +15 V and 60 mA at −15 V for control logic, while the dedicated fan consumes 30 VA, so these loads should be included in the machine’s low-voltage supply. Insulation category C materials are employed to withstand the peak conductor temperatures associated with continuous industrial duty.
