TDM01.2-W050-300-W1-115V Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat TDM01.2-W050-300-W1-115V is part of the TDM Servo Drive Modules series and features a continuous current of 45 Amps and a peak current of 50 Amps. The drive utilizes forced ventilation for cooling and has a link circuit voltage of 300 VDC. It is rated for a continuous power output of 15 kW and has a protection class of IP10.
Internal Product Review
The TDM01.2-W050-300-W1-115V is a servo drive module built for dependable axis control with 45 A continuous current and 50 A peak current. Forced ventilation and a 300 VDC link circuit support stable thermal behavior and consistent drive performance in cabinet installations. Strong 15 kW continuous power makes the module a very capable choice for demanding motion applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The TDM01.2-W050-300-W1-115V is a servo drive module in the TDM Servo Drive Modules series from Bosch Rexroth Indramat. The unit converts the regulated DC link voltage of a shared supply into controlled three-phase output for Indramat asynchronous and brushless servo motors used in positioning, packaging, and material-handling lines. By delivering programmable current and voltage, the module closes the power loop between the machine controller and the motor, enabling repeatable velocity, torque, and acceleration profiles required in industrial automation cells.
The drive supplies a continuous phase current of 45 A, supporting mechanical loads up to a continuous output power of 15 kW. Its internal DC bus is maintained at 300 VDC, and the power section is cooled by forced ventilation from an integral blower that requires AC 115 V. Under rated conditions, the electronics dissipate 250 W of heat, so airflow around the module must remain unobstructed. The type current rating matches the module’s short-term overload capacity for transient demands. Built-in ±15 V auxiliary rails are available; each external tap can source 15 mA, while the dedicated signal rails can deliver 140 mA on the +15 V line and 60 mA on the -15 V line for encoder or sensor circuitry. The protection class is IP10, which indicates open-style installation inside a control cabinet.
The module can operate at ambient temperatures up to 55 °C when the mounting altitude does not exceed 1000 m. Above that height, output derating applies. During acceleration events, the power stage can deliver a peak current of 50 A, allowing short bursts of motor torque without saturating the link capacitors. The assembly weighs 10 kg, so standard DIN rail or panel fixtures can support it without additional bracing. Front-to-back airflow must be maintained so the cooling path remains effective during operation.
