TDM 2.3-030-300-W1-000/S101
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911230650
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The TDM 2.3-030-300-W1-000/S101 Servo Control drive is manufactured by Bosch Rexroth Indramat. The drive operates with a type current of 30 A, DC 300 V link circuit voltage, a Built in Fan cooling system, and its Rated Connection Voltage for Built-in Fan is Generated within Unit.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The TDM 2.3-030-300-W1-000/S101 is a three-phase convertor servo drive module for the MAC servo motors by Rexroth engineering. These modules are used to get high accuracy of operation with the management of speed of the NC motors. These servo drive modules are used as a machine tool in the woodworking machines, metal machining, automation system, and transfer liens as well. These drives optimize the MAC motor operation. The TDM 2.3 is the special obsolescent unit for the MAC motors serial from 63 to 93.
The TDM 2.3-030-300-W1-000/S101 is the servo drive module that generates a three-phase system applied to MAC servo motors along with rotor position to maintain speed range following frequency, amplitude, and phase. The frequency and torque determine the speed of the servo motors and maintained it concerning different applications. These servo modules also established themselves as torque-controlled drives.
The TDM 2.3-030-300-W1-000/S101 has the bus connection, optional rating plate, plug-in terminal, and programming MOD module hardware. It has a rating current of +24V and has a tolerance of +/-15% and a rating of 300amps. It has a blower fan for cooling the control cabinet during operation. The ambient temperature for the servo module is +5°C to +45°C with the maximum rating of +55°C. The maximum elevation for the installation of the module should not exceed 1000 meters above sea level. The drive module should be mounted as a flush mounting as per DIN VDE 0160 in the control cabin. It has the protection category of IP 10. The only restriction of the drive allows that the heat generated parts should not be installed underneath the module as it can heat the drive and can cause damage to it. The proper ventilation and air cooling must be established to avoid heating inside the control cabin. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
