TDM 2.1-030-300-W1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911236235
The Bosch Rexroth Indramat TDM 2.1-030-300-W1 is a servo drive module in the TDM Servo Drive Modules series. It features a continuous current of 30 Amps, a continuous power output of 9 kW, and operates with a 300 VDC link circuit voltage. The module uses forced ventilation for cooling, has a protection rating of IP10, and weighs 10 kilograms.
Internal Product Review
The TDM 2.1-030-300-W1 is a servo drive module that delivers 30 A continuous current and 9 kW continuous power for solid motion-control performance. Forced ventilation and a 300 VDC link circuit support stable thermal behavior and consistent response in servo applications. A strong choice for industrial service where dependable drive performance is the priority.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The TDM 2.1-030-300-W1 servo drive module is produced by Bosch Rexroth Indramat as part of the TDM Servo Drive Modules series. It acts as the power stage between the mains supply and an Indramat servo motor, converting fixed-frequency input into a controlled output that maintains precise speed and torque in machine-tool, packaging, and material-handling axes. Inside the automation cell, the drive monitors operating parameters and exchanges status data with upper-level motion controllers. This arrangement supports steady axis response during changes in load and speed.
The drive supplies a continuous phase current of 30 A and can deliver up to 9 kW of mechanical power when paired with a matched motor. The link circuit is held at 300 VDC, providing the DC bus level used by the power stage during operation. During short accelerations, the peak current remains the same as the continuous rating, which helps keep the load on the switching devices predictable. At that load, the electronics dissipate 190 W, and this heat is removed by forced ventilation from an auxiliary fan that consumes only 30 VA from the control supply. The cooling path helps stabilize semiconductor temperature and supports consistent current regulation during continuous duty.
The housing carries a protection rating of IP10, so the cabinet should provide clean airflow and protection against accidental contact. Continuous duty is allowed at ambient temperatures up to 55 °C and at altitudes up to 1000 m; operation above those limits requires derating. Insulation category C and humidity class F describe the electrical insulation and moisture tolerance used by the module. The control circuits draw 140 mA from the +15 V rail and 60 mA from the −15 V rail, so those loads must be included in the control power budget. With a total mass of 10 kg, the module remains suitable for dense cabinet mounting without adding excessive weight to the panel structure.
