TDM 1.3-100-300-W1-000/S100 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911250784
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
5 Seconds
The Bosch Rexroth Indramat TDM 1.3-100-300-W1-000/S100 is part of the TDM Servo Drive Modules series and features a built-in fan for cooling, with the fan supply generated within the unit. This module has a type current of 100 Amps, operates at a link circuit voltage of 300 Volts DC, and requires a minimum cabinet height of 400 mm with at least 80 mm of cooling clearance. The module measures 105 mm in width and 390 mm in overall depth, and includes integrated starting lockout.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The TDM 1.3-100-300-W1-000/S100 is manufactured by Bosch Rexroth Indramat and belongs to the TDM Servo Drive Modules series. Within a control cabinet, the module converts shared DC link energy into regulated three-phase power for a connected servo motor while supervising enable conditions from the higher-level controller. By combining power conversion, signal handling, and interlock logic in one housing, it provides a direct interface between machine control software and axis mechanics in packaging lines, material-handling cells, and metal-cutting centers. This arrangement supports coordinated axis operation where stable motor control and compact cabinet integration are required.
The housing depth of 373 mm and a module width of 105 mm set the slot space needed on the mounting rail, while the total projection of 390 mm includes allowance for front-side wiring. Cooling is provided by a built-in fan, and the fan supply is generated within the unit, so no auxiliary power source is required. The power stage is linked to a DC 300 V bus and can deliver up to 100 A during acceleration or load transients. An integrated starting lockout prevents unintended energization until cabinet safety circuits are satisfied, and the terminal field keeps logic and power connections separated for clearer internal layout.
Installation clearances require a minimum cabinet height of 400 mm above the module and a front spacing of 80 mm so the fan exhaust can exit without obstruction. The M5 terminals are tightened to 3 Nm, while the M6 fasteners are tightened to 5 Nm to secure the DC bus and motor leads. Field wiring is organized across three plug blocks: X5 offers 15 poles for command and diagnostic lines, X6 provides 10 poles for sensor feedback, and X9 allocates 4 poles for relay outputs. This layout keeps the drive, control, and feedback circuits electrically separated inside the cabinet and helps maintain orderly cable routing.
Frequently Asked Questions about TDM 1.3-100-300-W1-000/S100:
Q: What is the cooling method used in the TDM 1.3-100-300-W1-000/S100 module?
A: The TDM 1.3-100-300-W1-000/S100 servo drive module uses a built-in fan for cooling.
Q: What is the link circuit voltage for the TDM 1.3-100-300-W1-000/S100 drive module?
A: This unit supports a link circuit voltage of DC 300 V.
Q: What is the type current rating of the TDM 1.3-100-300-W1-000/S100 module?
A: The TDM 1.3-100-300-W1-000/S100 has a maximum type current rating of 100 A.
Q: Does the TDM 1.3-100-300-W1-000/S100 module include a starting lockout mechanism?
A: The module features an integrated starting lockout for safety.
Q: How many poles does the X5 terminal have on the TDM 1.3-100-300-W1-000/S100?
A: The X5 terminal on this module has a 15-pole configuration.
