Product Description

The SF-A4.0230.030-10.019 Bosch Rexroth servomotor supports a flexible installation of its encoder cables only if horizontal trailing chains are put to use. This motor has a connector assignment based on the encoder type. The product-related mating connector has a maximum connectable cross-section of 2.5mm². This device should have no fluid accumulation around the output shaft with vertical mounting and installation. The unit should encounter no spiral-shaped movements at any point in time. Its tools for connector assembly have to be procured from the same manufacturer. This motor encompasses ball bearings on the output or flange side. The product can at no time be operated without establishing a proper grounding connection.

This device must neither be tipped nor dropped during the transportation process. The unit usage is not allowed in areas where an explosion hazard can take place. It may cause unfavorable consequences if the associated warning signs and notes are ignored. This motor installation is allowed only in machines that are in compliance with the 89/392/EEC machine directives. The product-linked warning signs have to be fitted onto the motor such that it is clearly visible after location. This device operation cannot take place if the installation machine-related emergency stop switch is not working. The servomotor has a year’s Wake Industrial warranty.

This product testing in a live state can be done only by skilled electrical personnel. The device can have an abnormally high surface temperature when it is in operation. The unit is used in unison with a completely digital Servodyn D inverter system. It supports a multi-turn absolute value encoder system if needed. This motor makes use of a sinusoidal emf for its operation. The product has a version code of 019. This device is fitted with a smooth shaft and no mating connector. The SF-A4.0230.030-10.019 servomotor can be sent to any destination of your choice.