Product Description

The SF-A2.0026.060-04.053 servomotor must undergo no structural modifications. The Bosch Rexroth motor is to be properly grounded before using it. This product features a 29ms separation time for the holding brake. The device has 6g shock resistance according to DIN IEC 68-2-27 specifications with no impairment to its function. This unit supports a cooling action by radiation. Its holding brake is a permanent magnet brake that is free of backlash. The motor shaft has a diameter of 14mm. This device depicts a 6,000min^-1 rated speed. The unit does not have the capability of using a resolver for its feedback. Its related holding brake needs to be checked after every 1,000 emergency stop braking operations.

This motor has no residual torque when the holding brake is in the open state. The product-related moment of inertia and insulation class is highlighted on its type plate fitting. This device comes equipped with a feather key and keyway on its shaft for positive-drive transmission of torque. The unit encounters a multi-axial stress state at the shaft-hub connection point due to axial, radial and torsional forces as well as the bending moment. Its feather key seat may wear out because of strong reversing operation. This SF-A2.0026.060-04.053 servomotor comprises a warranty period of one year.

The product associated holding brake has a control voltage of 24 VDC with a tolerance of +/-10%. This device portrays a closed status for the holding brake after ensuring the de-energization of the system. The unit supports IM V1 installation with the flange pointing downward for an oil-tight flange located on its output side only if there is sufficient lubrication at the sealed point. It has a change in the running behavior when the seat of the feather key is worn out. This motor has threads on its shaft end to mount and remove drive elements. This servomotor is shipped across the world by trustworthy logistics agents.