SE-LB3.095.030-14.015 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat SE-LB3.095.030-14.015 is a synchronous servo motor from the SE Synchronous Servo Motors series with a nominal speed of 3000 rpm and a peak current of 63 amps. It features a static torque of 11.6 Nm, a holding brake torque of 8.0 Nm, and a shock resistance of 6 g. The motor is designed with a 19 mm shaft diameter and 40 mm shaft length, and has a winding resistance of 1.68 Ohms.
Internal Product Review
The SE-LB3.095.030-14.015 is a Bosch Rexroth Indramat synchronous servo motor with 11.6 Nm static torque and 3000 rpm nominal speed. A maximum torque of 18.4 Nm paired with a 1.10 Nm/A torque constant supports strong acceleration and efficient current-to-torque response. An 8.0 Nm holding brake adds dependable axis retention, making this motor a strong choice for precise servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth Indramat SE-LB3.095.030-14.015 is a synchronous servo motor in the SE Synchronous Servo Motors series. It converts drive current into controlled mechanical rotation so that automated machinery can index, follow a profile, or hold position with precise feedback. The unit is selected for axes where moderate frame size, an integrated holding brake, and consistent speed regulation are necessary.
Its nominal speed is 3000 rpm, meaning the shaft can maintain that rotational rate under rated electrical and thermal load. When the rotor is energized but not turning, the motor can develop a static torque of 11.6 Nm to support suspended or clamped loads. That stall condition is produced by a continuous standstill current of 10.5 A, a figure used to size power stages and cabling. The electromagnetic design generates torque in proportion to current at a constant of 1.10 Nm/A, which simplifies current-loop control. Mechanical responsiveness is influenced by the rotor inertia of 2.07 × 10⁻³ kg·m², which supports rapid acceleration while helping limit small load disturbances. Its winding inductance is 18 mH and its resistance is 1.68 Ω. A 19 mm diameter and 40 mm shaft length help support the mechanical interface, and the motor has a 6 g shock rating.
During rapid indexing, the machine can call for as much as 18.4 Nm of torque for short time periods, and the winding can accept a peak current of 63 A to generate that output without demagnetization. Once motion stops, the integrated brake applies 8.0 Nm to lock the shaft, and its coil draws only 0.8 A from the control supply. Voltage feedback to the drive is characterized by a constant of 118 V/1000 rpm, helping the controller estimate speed from back EMF if encoder data is disrupted. This operating range suits pick-and-place gantries and moderate-load transfer stations.
