Product Description:

The SE-D1.010.060-14.000 is a compact synchronous servo motor produced by Bosch Rexroth Indramat for the SE Synchronous Servo Motors series. In automated machinery, it delivers closed-loop rotary positioning, supplying repeatable torque and speed to indexing tables, pick-and-place units, and light conveyor axes that require fast and precise motion. By combining permanent-magnet excitation with high-resolution feedback, the unit converts inverter output into controlled shaft rotation for packaging, assembly, and electronics manufacturing lines.

The motor mounts on a flange with a diameter of 60 mm, while the shaft has a diameter of 11 mm and extends 23 mm to accept couplings or pulleys. Power and feedback conductors terminate in a 1.5 mm² connection area, and the overall housing length is 227 mm, allowing the unit to fit within narrow machine spaces. A permanent-magnet holding brake provides 1.5 Nm of static torque and releases when supplied with 24 V DC at 0.38 A. During operation, the rotor can reach a nominal speed of 6000 rpm, supporting rapid movement in automated positioning applications. The sealed aluminum housing has an IP65 protection rating, keeping dust and water jets away from internal parts. Acoustic output is limited to 58 dB(A), reducing audible disturbance on the production floor.

The bearings have an expected service life of 20000 h, providing an extended operating period before scheduled replacement. Thermal sensors trigger drive inhibition at 155 °C to protect the motor insulation when temperature increases because of ambient conditions or sustained loading. The assembly weighs 3.1 kg, helping limit the load imposed on compact machine structures during rapid acceleration. Its aluminum frame withstands shocks of up to 6 g that may occur in high-speed pick-and-place gantries and other machinery with frequent starts and stops.