SE-C4.210.030-14.037 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat SE-C4.210.030-14.037 belongs to the SE Synchronous Servo Motors series and has a flange size of 142 mm with a shaft size of 24 x 50 mm. The motor provides a nominal speed of 3000 rpm, standstill current of 23 Amps, and a brake supply voltage of 24 V DC. Weighing 24 kilograms with brake, it features IP67 protection and a maximum noise level of 58 dB.
Internal Product Review
The SE-C4.210.030-14.037 is a Bosch Rexroth Indramat synchronous servo motor that stands out for IP67 protection and a 3000 rpm nominal speed. A 58 dB(A) noise level and 24 V DC brake supply support refined operation and dependable braking integration in servo applications. An excellent motor selection for demanding motion systems requiring stable performance and strong environmental protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SE-C4.210.030-14.037 is a synchronous servo motor built by Bosch Rexroth Indramat within the SE Synchronous Servo Motors series. As an electromechanical actuator, it couples directly to gearboxes, ball screws, or belt transmissions to deliver precise rotary motion required for pick-and-place heads, packaging lines, and metal-cutting spindles. Integrated feedback and a closed shaft design allow the drive controller to regulate position, velocity, and torque so that machine cycles remain consistent even under variable mechanical loading. This layout suits automated equipment that depends on repeatable starts, stops, and speed changes during continuous production.
The motor body fastens to machinery with a flange that measures 142 mm square, while its shaft extends a nominal Ø24 x 50 mm to engage couplings. No keyway is cut into the shaft, so torque transfer must rely on frictional clamping or a keyed adapter. With the brake assembly installed, overall length reaches 394 mm and total mass is 24 kg, which affects mounting support and available installation space. A molded stator housing and radial seal grant an ingress protection rating of IP67, making the motor suitable for wet or dusty operating areas. The winding terminals accept motor cables with a conductor area of 6.0 mm². Audible noise remains at 58 dB(A), and the frame withstands shocks up to 6 g without losing alignment.
Electrically, the rotor is rated to attain a nominal speed of 3000 rpm, and the drive can sustain that operating point by supplying up to 23 A of continuous standstill current. The integrated holding brake is energized from a 24 V DC source; during rapid stops, the brake can absorb kinetic energy up to 4085 Ws and dissipate it through an internal 1.0 Ω resistor. A built-in tacho generator delivers 2.7 V per 1000 rpm to provide proportional speed feedback for closed-loop regulation. That feedback signal helps the controller correct speed deviations during acceleration, deceleration, and steady-state running.
