Product Description:

The SE-C4.170.030-14.150 is a synchronous servo motor produced by Bosch Rexroth Indramat within the SE Synchronous Servo Motors series. It delivers closed-loop rotary motion for positioning axes, pick-and-place equipment, and other automated machinery that need high repeatability and fast response. By combining servo-controlled motion with an electromechanical holding brake and a sealed housing, the unit is suited for applications that require controlled stopping and reliable operation in demanding environments. This arrangement makes it appropriate for machines where compact installation, accurate positioning, and resistance to contaminants are all important.

A bearing life of 20,000 h indicates the expected operating time before relubrication or replacement becomes necessary. The holding brake disengages in 50 ms and re-engages in 55 ms, allowing quick transitions between motion and holding states; the actuation coil is energized from a control line rated at 24 V DC. An enclosure rating of IP67 seals the motor against dust and temporary immersion, which helps protect internal components in splash-prone or washdown areas. During sustained stall conditions, the windings can draw up to 19 A, so the matching drive and cabling must be sized for that current. Acoustic output remains below 58 dB(A), and the overall motor length is limited to 362 mm for compact machine layouts.

The unit weighs 21 kg, which helps support stable mounting while still allowing installation with proper lifting equipment. Mounting follows the flange face code IM B5; the mating surface is 142 mm square with a 130 mm pilot for accurate centering on the machine face. Power is transferred through a solid shaft that measures 24 mm in diameter and 50 mm in length, providing good coupling engagement for standard hubs and clamping elements. The housing withstands shocks up to 6 g, helping the motor remain suitable for indexing equipment and other machines that generate short mechanical impacts.