SE-C4.170.030-10.000 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat SE-C4.170.030-10.000 is a 19 kilogram servo motor from the SE Synchronous Servo Motors series. It offers a nominal speed of 3000 rpm and delivers a maximum torque of 43.0 Nm. The motor features IM B5 basic mounting, a shaft size of 24 by 50 millimeters, and a moment of inertia of 4.08 x 10^-3 kg·m².
Internal Product Review
The SE-C4.170.030-10.000 is a Bosch Rexroth Indramat synchronous servo motor with IM B5 mounting and a nominal speed of 3000 rpm. Strong motion performance comes through clearly with 43.0 Nm max torque and 15 Nm static torque. Low 4.08 x 10^-3 kg·m² inertia and a 10.1 ms electrical time constant support crisp servo response.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SE-C4.170.030-10.000 is a synchronous servo motor produced by Bosch Rexroth Indramat and delivered under the SE Synchronous Servo Motors series. As a rotary actuator, it converts controlled electrical energy into precise mechanical motion for positioning tasks, feed axes, and speed-regulated drives in automated equipment. Its synchronous design supports accurate speed regulation and position control, making it suitable for indexing stations, transfer systems, and other automated machinery that depends on smooth rotary motion during repeated production cycles.
This model develops a nominal shaft velocity of 3000 rpm, giving the system a fixed speed reference for coordinating multi-axis motion. During standstill it can hold or advance moderate loads with a static torque of 15 Nm, while short duty peaks are handled by a maximum torque reserve of 43.0 Nm; this margin helps absorb rapid acceleration or process disturbances without stalling. Dynamic behavior is influenced by a rotor inertia of 4.08 × 10⁻³ kg·m², allowing quick speed changes while minimizing overshoot on light tooling. Current in the stator windings rises to 63% of its final value within an electrical time constant of 10.1 ms, so torque commands from the drive are followed with minimal delay. Mechanical installation uses the IM B5 flange mounting pattern, and the housing length is limited to 315 mm to ease machine layout.
Thermal characteristics show that the motor’s temperature climbs slowly, requiring 36 min to reach 63% of its steady value; this supports intermittent overloads without added cooling hardware. Resistance to shocks up to 6 g helps protect magnetic alignment during transport or on machinery with high impact loads. The assembled unit weighs 19 kg, which is important when sizing linear slides or rotary tables. With a phase winding resistance of 0.75 Ω, heat losses stay moderate and simplify drive selection. A Ø24 × 50 mm smooth shaft without a keyway mates with suitable couplings, and the matching feedback connector is not included with the motor.
