SE-B5.700.030-00.000 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat SE-B5.700.030-00.000 is part of the SE Synchronous Servo Motors series and has a nominal speed of 3000 rpm with a mass of 51 kg. It features a flange diameter of 180 mm, IP65 protection rating, and a noise level of 58 dB(A). The servo motor is equipped with a 32 mm shaft diameter and uses a power cable size of 25 mm².
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SE-B5.700.030-00.000 is a synchronous servo motor produced by Bosch Rexroth Indramat within the SE Synchronous Servo Motors series. It serves as a drive element in industrial automation systems where controllers require fast, accurate rotation to position tooling, conveyor sections, or assembly fixtures. The motor pairs a permanent-magnet rotor with tacho feedback so a compatible Rexroth inverter can regulate torque and speed through closed-loop control. This arrangement helps maintain consistent motion profiles as operating loads change.
This model reaches a nominal speed of 3000 rpm, allowing process cycles to stay short without exceeding mechanical limits. The output shaft has a diameter of 32 mm with a k5 fit and accepts the supplied A10 × 8 × 50 feather key for positive torque transfer. With a protection rating of IP65, the housing blocks dust and directed water jets, allowing installation near the work area without an additional cabinet. The feedback devices receive a sensor supply of ±15 V DC, which supports the built-in tachogenerator and resolver circuits without external regulators. Power conductors with cross-sectional areas up to 25.0 mm² can be terminated through the Pg29 gland, helping limit resistive losses when the drive supplies full current to the stator windings.
The motor weighs 51 kg, providing a substantial mounting mass that helps damp vibration during operation. Acoustic emissions are limited to 58 dB(A), keeping motor noise below typical sound levels found in industrial plants. The assembly withstands shocks up to 6 g during transport or machine indexing, helping protect the bearings and windings from impact damage. During operation, the tachogenerator outputs 2.7 V/1000 rpm, providing the drive with a direct analog reference for speed control. A 180 mm j6 flange provides an accurate mounting interface for alignment with compatible gearboxes or machine plates. The motor also has a DIN 332-DR M12 centering hole, a 58 mm shaft length, and an overall length of 495 mm for integration with gearboxes or belt pulleys.
