SE-B4.170.030-00.000 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat SE-B4.170.030-00.000 motor is part of the SE Synchronous Servo Motors series and features IM B5 construction with a flange standard of IEC 72-2 / DIN 42948. This motor provides a nominal speed of 3000 rpm with a static torque of 17 Nm, and uses natural convection cooling. It includes a brushless tachogenerator feedback device and integrated thermistor thermal protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SE-B4.170.030-00.000 is a synchronous servo motor produced by Bosch Rexroth Indramat for the SE Synchronous Servo Motors series. It is intended for closed-loop drive systems where quick acceleration and precise holding torque are required, such as pick-and-place modules, gantry axes, and conveyor stations. By integrating speed feedback and thermal monitoring into a compact housing, this motor serves as a controlled source of rotary motion that can be paired with Rexroth digital drives in general-purpose automation. Its integrated sensing elements reduce the need for separate external feedback hardware and allow the connected drive to monitor operating conditions during routine motion.
The mechanical interface conforms to the IM B5 construction type, meaning the flange carries the complete load while the housing has no foot mount, which simplifies vertical or horizontal installation on standard machine frames. Under rated conditions, the rotor reaches a nominal speed of 3000 rpm, enabling direct coupling to gearless motion stages without exceeding typical servo drive frequency ranges. A static torque of 17 Nm is available at standstill for holding payloads during dwell periods. During transport or service, the unit withstands shocks up to 6 g, helping protect the magnetic circuit and bearings from sudden impacts. Acoustic emission is limited to 58 dB(A), which helps keep machine noise low inside assembly cells.
Thermal management relies on natural convection, so no external blower is required and enclosure design stays minimal. This cooling method keeps the motor body free of auxiliary airflow hardware and supports simpler axis layouts. Speed feedback is supplied by a brushless tachogenerator, allowing the drive to regulate velocity without a separate encoder. The flange complies with IEC 72-2 / DIN 42948, and a 2.5 mm² power connector supports current delivery within the drive rating. The shaft follows the DIN 6885 profile and is machined with a keyway and feather key for positive coupling. Overtemperature is monitored by an integrated thermistor with a response range of -10 to +145 °C, helping protect the insulation system.
