SE-B4.130.030-00.101 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat SE-B4.130.030-00.101 is a synchronous servo motor from the SE Synchronous Servo Motors series. It delivers a maximum torque of 27.6 Nm and operates at a nominal speed of 3000 rpm. The motor weighs 16 kilograms and features a flange diameter of 130 mm with a 24 x 50 mm shaft size.
Internal Product Review
The SE-B4.130.030-00.101 is a Bosch Rexroth Indramat synchronous servo motor with a nominal speed of 3000 rpm and maximum torque of 27.6 Nm. The oil-tight driving-end end plate and 2.7 V/1000 rpm tachogenerator output support dependable operation and stable feedback in servo applications. Strong 13 Nm static torque makes this motor a very capable choice for precise motion systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SE-B4.130.030-00.101 is a brushless AC servo motor from Bosch Rexroth Indramat in the SE Synchronous Servo Motors series. It is intended for closed-loop positioning and speed regulation on automated packaging lines, pick-and-place gantries, and general material-handling axes. A compact 283 mm overall length and standardized mounting geometry help it fit common frame layouts, while the internal tachogenerator supplies direct speed feedback to the drive controller for stable speed monitoring.
The motor sustains a nominal speed of 3000 rpm, allowing continuous operation at rated load without exceeding thermal limits. For rapid acceleration, it can generate a peak torque of 27.6 Nm, and its static holding capability is 13 Nm for load retention at standstill. A frame mass of 16 kg improves damping and also serves as a thermal reservoir during duty-cycle peaks. Mounting uses a flange diameter of Ø130 j6, with concentric location refined by a Ø125.4 h9 centering collar and a DIN 332-DS M8 tapped center hole. This arrangement helps keep runout low and supports accurate coupling to pulleys, gearboxes, and similar driven elements.
Power conductors terminate in a motor connection area of 2.5 mm², matching typical servo-grade cables used for this class of motor. An elastomer seal with an O-ring size of 124-3 mm completes the housing barrier so lubricant cannot migrate into the stator during operation. Speed feedback voltage is linear at 2.7 V/1000 rpm, which supports straightforward calibration in the drive. The ground shaft measures Ø24 × 50 mm and includes a Feather Key A8×7×40 for positive torque transfer to pulleys or couplings, while the oil-tight driving-end end plate helps protect the internal bearings from process fluids.
