SE-B3.095.060-14.000 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat SE-B3.095.060-14.000 is part of the SE Synchronous Servo Motors series and has an overall mass of 15.2 kilograms. It features a rated speed of 6000 min⁻¹, a stall torque of 9.8 Nm, and a torque constant of 0.64 Nm per amp. The motor has an allowable axial load of 133 newtons and a brake holding torque of 8.0 Nm with a brake voltage of 24 VDC.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SE-B3.095.060-14.000 is a synchronous servo motor produced by Bosch Rexroth Indramat within the SE Synchronous Servo Motors series. Designed for demanding motion axes in industrial automation, the unit converts controlled electrical input from a drive into precise rotational power for feed rates, positioning tables, and similar equipment where tight speed regulation and rapid torque response are required. Its synchronous design helps the drive maintain accurate rotor alignment with the commanded electrical field during indexing and contouring tasks. This makes the motor suitable for axes that must start, stop, and reverse quickly while maintaining repeatable motion.
At a rated speed of 6000 rpm, the rotor can reach high angular velocity without losing synchronization with the stator field. When the shaft is held at zero speed, the motor can deliver a stall torque of 9.8 Nm while drawing a stall current of 15 A, which indicates the continuous load it can support during static positioning. A torque constant of 0.64 Nm/A links drive current to output torque, which helps the drive produce predictable force. Its voltage constant of 63 V/1000 rpm shows the back EMF generated as speed rises. The 0.7 Ω phase resistance, 13 ms electrical time constant, 2.07 × 10⁻³ kg·m² rotor inertia, and 25 min thermal time constant affect current response, acceleration behavior, and heat buildup during changing loads. These electrical values also affect how the motor responds to rapid command changes and sustained holding duty.
The motor tolerates an axial thrust of 133 N, which helps protect the internal bearings from process forces. The housing measures 359 mm in overall length and weighs 15.2 kg, so the machine structure must support both its size and its moving mass. Power is transferred through a Ø19 × 40 mm shaft, and a holding brake rated at 8.0 Nm stops motion during power-off conditions. The brake coil requires 24 VDC and 0.8 A for energizing, allowing the brake to release when the axis is commanded to move.
