Product Description:

The SE-B3.095.060-00.000 is a synchronous servo motor produced by Bosch Rexroth Indramat within the SE Synchronous Servo Motors series. Designed for closed-loop industrial automation, the unit converts drive current into controlled rotary motion for positioning axes, pick-and-place gantries, and similar applications where accurate torque and speed response are required. In closed-loop use, the motor supports repeatable acceleration, controlled holding, and stable speed changes during indexing and transfer tasks. An integrated tachogenerator outputs 1.8 V/1000 rpm, providing analog speed feedback for legacy drive amplifiers that do not use digital encoders.

A designed operating life of 20000 h for the bearings supports extended uptime before overhaul. The front face uses construction type IM B5 and mounts to a flange that measures 116 mm, while a precisely ground centering seat of 110 mm with j6 tolerance and an M6 centering hole locate the housing concentrically on the machine casting. This arrangement supports accurate face mounting on machine plates and gearbox adapters. Power and feedback conductors connect through terminals sized for a 2.5 mm² cross-section. Motion torque is transmitted through a shaft that is 19 mm in diameter and 40 mm long, retained by a feather key A6×6×32. The enclosure is sealed to IP67, which helps protect internal components from dust and temporary immersion.

Dynamic durability is reflected by a shock rating of 6 g, allowing the stator and feedback hardware to withstand transport loads or emergency stops without misalignment. During operation, the motor generates only 58 dB(A), which helps reduce audible noise in nearby work areas. The total length is limited to 320 mm, and the overall weight of 14.5 kg makes the motor manageable to handle while still providing useful thermal mass for steady running temperatures. Its compact overall form allows the motor to fit into medium-power automation assemblies where space around the axis is limited.