SE-B3.095.030-10.000 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat SE-B3.095.030-10.000 is a servo motor from the SE Synchronous Servo Motors series with a flange size of 116 mm and a mass of 14.5 kg. It offers a nominal speed of 3000 rpm, static torque of 11.6 Nm, and a peak current of 63 A. The shaft measures 19 by 40 mm and the motor features a torque constant of 1.10 Nm per amp and a voltage constant of 118 V per 1000 rpm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SE-B3.095.030-10.000 synchronous servo motor is produced by Bosch Rexroth Indramat within the SE Synchronous Servo Motors series. It is intended for industrial automation tasks that require closed-loop motion, such as pick-and-place heads, conveyor sections, and tool drives. When coupled to a matching drive controller, the unit converts three-phase electrical energy into accurate shaft rotation, allowing machine builders to position loads repeatedly and regulate cycle speed.
At its rated speed of 3000 rpm, the motor can sustain line velocity without losing synchronization, and its static torque of 11.6 Nm allows it to hold a load while stationary. A peak current of 63 A is available for rapid acceleration, while a standstill current of 10.5 A reflects the continuous thermal limit. The electromagnetic design provides a torque constant of 1.10 Nm/A, meaning each ampere from the inverter produces approximately one newton-meter of torque. With an electrical time constant of 2.8 ms and a winding inductance of 18 mH, current rises quickly so the control loops can react to sudden command changes. The winding resistance is 1.68 ohms, which affects resistance-related heating and drive voltage demand. The shaft measures 19 × 40 mm and connects to compatible couplings, while the motor mounts through its 116 mm flange.
The motor has a mechanical time constant of 10.8 ms, allowing its speed to settle rapidly after torque transients. Thermal behavior is governed by a time constant of 35 min, allowing intermittent overloads before the housing temperature stabilizes. The overall mass is 14.5 kg, which must be considered when supporting the motor and evaluating the load placed on the mounting surface. The maximum body length is 320 mm, which affects the installation space required behind the mounting flange. A voltage constant of 118 V/1000 rpm indicates the back electromotive force generated during operation and helps determine the appropriate drive bus voltage.
