SE-B3.075.060-00.000 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat SE-B3.075.060-00.000 is a synchronous servo motor in the SE Synchronous Servo Motors series. It features a nominal speed of 6000 rpm, a static torque of 9.3 Nm, and a torque constant of 0.98 Nm per ampere. The motor weighs 12.4 kg, has a flange width of 116 mm, and operates within an ambient temperature range of 0 to 40 degrees Celsius.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SE-B3.075.060-00.000 synchronous servo motor is manufactured by Bosch Rexroth Indramat as part of the SE Synchronous Servo Motors series. Designed for industrial automation, the unit converts controlled three-phase input from a dedicated drive into rapid and precise shaft rotation that positions tooling, indexing tables, or conveyor sections. Its compact construction and integrated tachogenerator support closed-loop speed regulation without external sensors. That layout suits high-cycle assembly, pick-and-place, and packaging axes where repeatable motion and fast directional changes are required.
The motor can reach a continuous speed of 6000 rpm, giving short mechanical response times on light loads. With the rotor locked, it supplies 9.3 Nm of static torque. Each ampere of phase current produces approximately 0.98 Nm/A, so moderate current from the inverter generates usable holding force. Electromagnetic behavior is influenced by a stator inductance of 21 mH and a phase resistance of 2.1 Ω, which affect current rise time and copper losses. The through-shaft measures Ø19 × 40 mm, and the built-in tachogenerator outputs 1.8 V per 1000 rpm for feedback. Voltage ripple at the commutation points stays below 1.5%, and power is routed through a 2.5 mm² connector field that accepts standard industrial crimp ferrules.
The motor body weighs 12.4 kg and has a length of 288 mm, so it can be mounted on moving carriages without adding excessive inertia. A flange measuring 116 ±0.6 mm across helps maintain alignment to reducers or belt pulleys. The housing tolerates shocks up to 6 g during transport or emergency stops. Continuous operation is permitted at ambient temperatures from 0 to 40 °C. Noise emission remains at 58 dB(A) under nominal load.
