Product Description:

The SE-B3.033.060-14.000 synchronous servo motor is produced by Bosch Rexroth Indramat within the SE Synchronous Servo Motors series. This compact AC drive component converts electrical power into precise rotational motion for axes that require high-speed positioning in automated machinery. By integrating a tachogenerator for feedback and an optional holding brake, the motor supports closed-loop velocity and position control in packaging lines, pick-and-place modules, and similar industrial applications. Its compact form also suits installations where machine space is limited but accurate motion is still required.

At its rated operating point, the motor runs at 6000 rpm nominal speed, allowing rapid cycle times with fast controllers. The rotor generates 4.2 Nm of static torque at standstill, providing available torque before rotation begins. Drawing 7.7 A of standstill current, the windings remain within thermal limits while delivering that output. The housing has an IP67 rating, which keeps dust and temporary immersion from reaching the stator or feedback devices. A 110 mm centering diameter aligns the flange on machine frames, minimizing runout during coupling. Electrical terminations accept conductors up to 2.5 mm², and a plug braking resistor of 5.6 Ω can be connected to absorb regenerated energy during deceleration.

The motor weighs 8.8 kg with its brake, and its overall length of 263 mm helps it fit into tight machine spaces. Mechanical output is transmitted through a 19 × 40 mm shaft that accepts standard couplings. Shock tolerance of 6 g helps protect internal parts during handling or abrupt machine stops. Continuous service noise stays under 58 dB(A), which helps keep sound levels lower in enclosed equipment. The bearings accept 145 N of axial load, and the tachogenerator produces 1.8 V per 1000 rpm so the drive receives proportional speed feedback during operation.