SE-B2.030.030-00.000 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat SE-B2.030.030-00.000 is a synchronous servo motor in the SE Synchronous Servo Motors series. It features a flange size of 100 mm, a nominal speed of 3000 rpm, and a peak current of 21 Amps. The motor has a protection rating of IP67 and a mass of 7.6 kilograms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SE-B2.030.030-00.000 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and supplied under the SE Synchronous Servo Motors series. Designed for closed-loop position and velocity control, the motor converts controlled drive current into mechanical rotation for axes on packaging lines, pick-and-place gantries, and other automated equipment. By integrating with compatible digital drives, it delivers precise torque output and rapid speed changes while occupying a compact frame suitable for direct machine mounting.
The motor attaches through a 100 mm square flange, an industry size that aligns with IEC mounting faces and keeps coupling hardware standardized. Under rated operating conditions, it reaches 3000 rpm, allowing fast cycle times without overspeeding the magnetic circuit. Torque generation corresponds to a torque constant of 1.14 Nm/A, which indicates the relationship between supplied current and motor torque. At standstill, the rotor can sustain 4.0 Nm of static torque while drawing 3.5 A, and short-duration demands are handled by a peak phase current of 21 A. The stator has an inductance of 82.0 mH, which moderates current ripple during drive operation.
The enclosure carries a protection rating of IP67, meaning the stator housing resists dust ingress and temporary immersion, making it suitable for washdown areas in food or chemical processing cells. Dynamic response is aided by a rotor inertia of 0.60 × 10⁻³ kg·m², supporting rapid acceleration without excessive controller gain. The total assembly weighs 7.6 kg, allowing installation on suitable fixed frames or moving carriages. A keyed shaft measuring Ø14 × 30 mm transmits torque through standard couplings, and the feather key supports pulley alignment. The overall length is limited to 254 mm, keeping the motor compact for installation in space-constrained machinery. The winding resistance is 9.5 Ω, an electrical characteristic that must be considered when matching the motor to a compatible drive and supply voltage.
