SE-B2.020.060-00.000 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat SE-B2.020.060-00.000 is a servo motor from the SE Synchronous Servo Motors series, with a nominal speed of 6000 rpm and a maximum torque of 5.0 Nm. Its motor length is 230 mm, mass is 6.5 kg, and it features a shaft size of 14 by 30 mm. The motor offers a static torque of 2.0 Nm and a torque constant of 0.40 Nm per Ampere.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SE-B2.020.060-00.000 servo motor is produced by Bosch Rexroth Indramat and belongs to the SE Synchronous Servo Motors series. As a rotary actuator, it couples directly to machine shafts to deliver controlled torque and speed for positioning or cyclic motion tasks in automated packaging stations, pick-and-place modules, light machining centers, and other compact motion systems. The compact frame and encoder-ready rear end make the SE-B2.020.060-00.000 suitable for integration with compatible drive controllers in distributed automation architectures, especially where limited mounting space and rapid axis response are important.
The motor reaches a nominal velocity of 6000 rpm, which supports high-speed axes with short cycle times. Its static holding capability is 2.0 Nm, which can maintain load position while the shaft is energized and not rotating. A torque constant of 0.40 Nm/A relates drive current to output torque, which helps the drive respond predictably. The electrical time constant is 4.6 ms, so current settles quickly during fast dynamic response. The motor has a 230 mm body length and a 14 mm by 30 mm shaft, which helps it fit compact machine layouts. Analog speed feedback is available through a 1.8 V per 1000 rpm tacho output, and the back-EMF constant is 46 V per 1000 rpm. The tacho output gives the drive a direct analog speed signal during closed-loop operation. The supply ripple remains at or below 1.5%, which helps keep velocity smooth on imperfect DC buses.
For acceleration peaks, the motor supplies 5.0 Nm, and the rotor inertia of 0.44 × 10⁻³ kg·m² helps limit overshoot during reversals. The winding inductance is 20.8 mH, and the winding resistance is 4.43 ohms, which affect PWM behavior and current limits in the connected drive. The housing tolerates shocks up to 6 g, which supports use on equipment exposed to vibration or movement. The motor mass is 6.5 kg, so it can be mounted on compact machine structures without unusually heavy support. It is often used on axes that start, stop, and reverse frequently.
