SE-B2.020.030-00.015 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat SE-B2.020.030-00.015 is a synchronous servo motor from the SE Synchronous Servo Motors series with a nominal speed of 3000 rpm and a mass of 6.5 kilograms. It features a shaft diameter of 14 mm, shock resistance of 6 g, and an IP67 protection class. The motor produces a noise level of 58 dB(A) and has a max length of 230 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SE-B2.020.030-00.015 is a brushless servo motor manufactured by Bosch Rexroth Indramat for the SE Synchronous Servo Motors series. Intended for industrial automation, the motor converts electrical input into controlled mechanical rotation, allowing precise positioning and speed control on packaging lines, pick-and-place gantries, and indexing stations. An internal tachogenerator supplies the drive with continuous velocity feedback so motion controllers can maintain accurate regulation under varying loads.
The motor reaches a rated speed of 3000 rpm, which is its synchronous operating point with the drive electronics. The housing meets IP67 protection requirements, allowing exposure to washdown conditions or incidental coolant spray without water ingress. A rotor shaft with a diameter of 14 mm (k5) balances minimal deflection with torsional stiffness, while the overall mass of 6.5 kg provides adequate thermal mass for intermittent overloads. The connector cavity accommodates 1.5 mm² power conductors, helping keep line impedance low for accurate current control. Additional mounting data include an M5 centering hole, an A5 × 5 × 25 feather key, a 30 mm shaft extension, and a maximum body length of 230 mm. These dimensions support accurate alignment and provide the clearance information needed when fitting the motor into compact machinery. Ripple on the tachogenerator signal is limited to 1.5% to support stable speed-loop tuning during operation.
A 95 mm (j6) centering diameter aligns the flange while limiting radial play at the mounting interface. The motor has a 6 g shock tolerance, allowing it to withstand mechanical loads that may occur during handling or machine operation. Acoustic emissions remain within 58 dB(A), helping machinery maintain controlled workplace sound levels. For speed feedback, the tachogenerator produces 2.7 V/1000 rpm, giving the drive a linear velocity reference throughout the operating range. This feedback signal allows the controller to detect speed changes and adjust motor current as the applied load varies. The compact body and sealed housing make the motor suitable for food-processing and assembly equipment that requires washdown capability, controlled vibration, and precise rotary motion.
