SE-B2.010.060-00.000 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat SE-B2.010.060-00.000 is part of the SE Synchronous Servo Motors series and has a flange size of 100 mm with a mass of 5.3 kg. This servo motor delivers a nominal speed of 6000 rpm and a maximum torque of 2.6 Nm. It features a keyway and feather key shaft configuration and a peak current of 14 A.
Internal Product Review
The SE-B2.010.060-00.000 is a Bosch Rexroth synchronous servo motor with a 6000 rpm nominal speed and 2.6 Nm maximum torque. Low 0.28 x10^-3 kgm² moment of inertia and a 77 ms ramp-up time support crisp acceleration and stable motion response. A keyway and feather key shaft configuration adds dependable mechanical engagement, making the motor a strong choice for dynamic servo axes.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SE-B2.010.060-00.000 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the SE Synchronous Servo Motors series. It is built for industrial automation tasks that demand compact geometry and repeatable velocity control, such as spindle drives or rapid indexing modules. By supplying controlled rotary motion through its keyed shaft, the motor enables precise positioning and speed regulation when paired with a compatible inverter and feedback loop. This arrangement supports accurate starts, stops, and speed changes in tightly spaced machine layouts.
The unit supports a nominal operating speed of 6000 rpm, giving machinery short cycle times and high throughput. During acceleration or process peaks, it can furnish up to 2.6 Nm of torque, and the lightweight rotor has an inertia of 0.28 × 10⁻³ kg·m², which permits brisk response without overshoot. The drive may demand momentary surges approaching 14 A of phase current, and the electromagnetic design translates every ampere into torque with a constant of 0.41 Nm/A. This combination of electrical and mechanical values includes a 100 mm mounting flange, a 77 ms ramp-up time, and a shaft with a keyway and feather key, making the motor suitable for pick-and-place heads, sorting spindles, or light cutting axes where quick response is required.
Holding performance is characterized by 1.0 Nm of static torque that is maintained with only 2.5 A of standstill current, minimizing heat generation during dwell periods. A back-EMF coefficient of 41 V/1000 rpm and a winding inductance of 47.6 mH give the controller stable voltage margins and smooth current transitions in rapid reversals. With a mass of 5.3 kg, an overall length of 207 mm, and a Ø14 × 30 mm shaft, the motor integrates easily while keeping overhung load low and supporting stable positioning. The compact body also helps the motor fit machines with limited installation space.
