Product Description

The SD-B3.095.030-10.000 permanent-field servomotor from Bosch Rexroth experiences axial plus radial forces on the shaft during the operation phase. This motor may have a high surface temperature when it is in use. The product is not meant to be installed with the shaft facing downward. This device needs a check to be done for the motor-inverter combination using its type label before its initial operation. The unit portrays restricted operation if it is connected to an inappropriate inverter. It is essential to observe the minimum cable cross-sectional areas in the cable glands to maintain the protection standard. This motor is connected to the U2, V2, and W2 terminals of the inverter.

The product uses separate sockets for the power and tacho connections. This device uses a cable with a maximum length of 100 m for the tacho connection. The unit must be used with only spare parts and cables approved by the manufacturer. Its tacho cable can be connected only after stripping the insulation from the cable. This motor needs a replacement to be done for the tacho board if it encounters any fault. The product has an overall length of 470 mm. This device is suitable for any application related to mechanical engineering.

The servomotor delivers velocity feedback with the integrated brushless tacho. This unit comes without mating connectors and they have to be bought separately. Its shaft does not have a keyway or a featherkey. The motor has no oil-tight bearing at the driving end. This product portrays a cylindrical shaft extension. The device has N vibration quality level according to DIN ISO 2373 specifications.