SB301 0608 830 206 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat SB301 0608 830 206 is a stationary system box from the SB System Box Units series and weighs 23.3 kg. It is splashproof, features one free card slot, and supports a maximum of 40 cell channels. The unit uses the SE3xx controller, VM300 power module, and supports system coupling via bus cables.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SB301 0608 830 206 is supplied by Bosch Rexroth Indramat within the SB System Box Units series. As a pre-engineered system box, it consolidates drive electronics, control logic, and field wiring into one enclosure so that assembly lines or test cells can add centralized motion control without requiring a separate control cabinet. The unit is intended for automation layouts where rapid installation and on-machine placement are preferred over a large, centralized control room. Its integrated format also shortens the external cable routes between the control equipment and connected machinery.
The box has a channel capacity of 1 for a stationary processing path, which simplifies cable routing around the installation. Core axis control is executed by the SE3xx controller mounted inside the frame, while high-current distribution is handled by a VM300 power module that supports the connected servo equipment. Torque commands are produced by the LT30x servo amplifier, giving the box an integrated drive path from the command layer to the motor windings. The enclosure does not require an additional outer cabinet, which reduces the amount of floor space needed for the installation. Its splashproof housing supports placement in areas exposed to coolant spray or incidental water splashes. One internal card slot remains open for optional diagnostic or I/O hardware, allowing expansion without an external bay.
System expansion is supported through KE series network hardware, and the optional KE312 communication module occupies the spare slot when a higher-level bus interface is needed. When the slot is unused, a BP303 slot cover seals the opening to maintain the enclosure’s protection against splashes. Power and data travel between neighboring boxes through bus cables, permitting as many as 40 cell channels across a maximum of 16 stacked units. A nonstandard lock option accommodates custom keying for installations with specific access-control requirements. The total transport mass is 23.3 kg, which should be considered when selecting mounting supports and handling equipment. The enclosure’s concentrated layout keeps the controller, power module, servo amplifier, and optional network hardware within the same protected assembly.
