RZP01.1-C2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911201257
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
30 Seconds
The Bosch Rexroth Indramat RZP01.1-C2 is an option module from the RZP Option Modules series. It features 8 analog inputs and 8 analog outputs, each with 16-bit resolution, as well as 32 digital inputs and 32 digital outputs. The module operates at a maximum temperature of 40°C, has dimensions of 104 mm by 86 mm, and supports ISO 11898 bus standard with a 9-pin D-SUB bus connector.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RZP01.1-C2 option module is produced by Bosch Rexroth Indramat within the RZP Option Modules series. Designed for mounting inside Rexroth control racks, the board extends motion-control platforms with additional field-level I/O and CANopen networking. By concentrating high-density analog, digital, and bus-interface resources on a single card, the unit connects sensors, actuators, and peripheral drives without external junction boxes. In an automation cell, it acts as the electrical intermediary that translates process signals to the controller and returns command outputs to connected hardware.
The module offers 8 (16-bit) analog inputs that sample voltage or current signals for closed-loop processing, and it also provides 8 (16-bit) analog outputs that supply proportional valves or reference setpoints. For discrete control, the board includes 32 digital inputs for status detection and 32 digital outputs that energize relays or optocoupler stages. All bus traffic and power reach the card through a 9-pin D-SUB connector mounted on its faceplate, while internal supply rails of +5 V and +15 V feed the logic and output stages. With a width of 86 mm and a length of 104 mm, the card fits standard Euro-format slots without adapter plates.
On the network side, the controller communicates over CANopen at selectable data rates of 125/250/500/1000 kbit/s, allowing throughput to be matched to cable length and node count. Compliance with the ISO 11898 physical layer supports interoperability with other CAN devices in the plant. The board is assigned classification 3K3, so it is suitable for installation areas with moderate humidity and non-conductive dust. Its specified functional temperature range is 0 °C to 40 °C; outside this range, derating or additional enclosure cooling is required to maintain conversion accuracy and reliable switching.
Frequently Asked Questions about RZP01.1-C2:
Q: How many analog inputs are available on the RZP01.1-C2?
A: The RZP01.1-C2 module provides eight 16-bit analog inputs for precise signal measurement.
Q: What is the specification for the analog outputs on the RZP01.1-C2?
A: This module offers eight 16-bit analog outputs for accurate analog signal control.
Q: How many digital input channels does the RZP01.1-C2 support?
A: The RZP01.1-C2 has 32 digital inputs, enabling broad digital signal acquisition.
Q: Which baud rates are supported by the RZP01.1-C2 on the CAN bus?
A: The device supports baud rates of 125, 250, 500, and 1000 kbit/s over the ISO 11898 bus standard.
Q: What type of bus connector does the RZP01.1-C2 use?
A: A 9-pin D-SUB connector is used for bus connection on this module.
