Product Description

The Bosch Rexroth RZC01.2-6T-007-F-23 is a chemistry module. As per the product type code, the product is RZC, the line is 1 and the design is 2. This module is compatible with three-phase AC input at 400 Volts with maximum 15% allowed voltage tolerance. The power rating of the RZC01.2-6T-007-F-23 is 5.5 kilowatts. The module is available with a NAMUR terminal strip. Support for 24 Volt standby power is also available. The standby power feature is available with filter current feedback. The RZC01.2-6T-007-F-23 chemistry module is designed for indoor use. Bosch recommends mounting of the module inside an IP23 rated cabinet. As the dimensions of the chemistry module and compatible drive controllers are very similar, the module can be mounted above, below or to the sides of the drive controllers. All those who deal with the module should read and understand the safety instructions.

No structural changes to the RZC01.2-6T-007-F-23 module are permitted by Bosch. If a unit is damaged then it must not be installed. The device should only be used according to the regulations detailed in the product documentation. The RZC01.2-6T-007-F-23 is an accessory for RD 500 drive control devices. Rated current of the RZC01.2-6T-007-F-23 module is 13 Amps. The peak output frequency of the module is 200 Hertz. Care must be taken to ensure that the module is only used with pulse frequencies exceeding 8 kilohertz. The ambient temperature at bearing assembly is -25 to 70 degrees Celsius. The ambient temperature range for operation is 0 to 40 degrees Celsius. A type label is affixed to the module and displays relevant information including the serial number, connecting voltage, rated current and order number. This unit can be shipped globally with a one-year warranty period from Wake Industrial.