Product Description

The RZC01.1-6T-011-F-23 chemistry module offered by Bosch Rexroth has an integrated sinusoidal filter. This makes the product support operation only at a pulse frequency of a minimum 8kHz. The filter tends to get damaged if the pulse frequency is below this range. It should always be ascertained that the associated driver has the NAMUR functions enabled. The maximum output frequency of the drive converter is not meant to be more than 200Hz. The module has an IP 23 protection rating. The motor used in the RD500 drive system along with the product is intended to make use of shielded four-core cables. The device uses four connectors for its connection with the converter.

The product may have a high dangerous voltage for up to half an hour after being turned OFF due to DC link capacitors. The unit operation has to always be performed by qualified and trained personnel. It is meant to be made sure that the fuse protection, switching OFF, grounding, cable dimensioning, as well as protection and separation from excess current are carried out based on the specified technical regulations. The module must depict a flush mounting style with the control cabinet so that a good electrical connection is established. This RZC01.1-6T-011-F-23 module has a warranty backup for one year.

The device has a B size class. The unit comes with the same size and width as its AC drive converter. Its mounting is done in such a way that there is always a minimum of 125mm clearance between the module and the related converter. However, no space is needed when one chemistry module is lined next to a similar module. Any work on this product has to be done only when there is no power to avoid material damage or bodily injury. The line supply and motor lines must be routed away from each other. The product is shipped through freight carriers such as USPS and UPS that have a well-known worldwide recognized network.