RLC1-125BGB Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat RLC1-125BGB is part of the RLC1 Motor Power Cables series and is designed as a basic power cable with an 18 AWG size and a 0.75 mm² cross section. It features a current capacity of 10.4 A, supports up to 5,000,000 bending cycles, and utilizes a double clamping connection style with an M23 power connector. The cable allows for direct motor-drive connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RLC1-125BGB motor power cable comes from Bosch Rexroth Indramat and belongs to the RLC1 Motor Power Cables series. It is built to route three-phase drive output from an inverter directly into a servo motor, allowing compact wiring runs inside moving drag-chain assemblies on automated production equipment. By combining a shielded conductor set with a basic polyurethane jacket, the cable maintains electrical continuity and mechanical stability under the repetitive motions common to pick-and-place robots, palletizers, and linear modules.
This model uses conductors sized at 18 AWG, corresponding to a copper cross-section of 0.75 mm²; together these figures define the resistance and current-carrying capability of each phase core. Under ambient conditions the assembly can carry up to 10.4 A continuously, matching the power demands of compact synchronous motors in the Rexroth drive lineup. For dynamic routing in an energy chain, the cable tolerates a minimum bend radius of 7.5×D and has been qualified for 5,000,000 flex cycles, so it can operate through long service intervals without conductor fatigue or insulation cracks. These mechanical ratings let machine builders shorten service loops and reduce cabinet depth while still preserving conductor life.
When installed in a stationary tray the allowed bend radius relaxes to 5×D, providing easier layout during initial machine build. Continuous operation is permitted within an environmental window of -30 to 40 °C, and identical limits apply for storage, ensuring consistent insulation resilience during transport or warehouse staging. Motor termination is accomplished with an M23 Power Connector, while the drive-side lugs are retained by a Double Clamping strain-relief to prevent pull-out under vibration. A direct motor-drive connection scheme shortens ground paths and minimizes voltage drop, supporting accurate current regulation in fast-acting servo loops.
Frequently Asked Questions about RLC1-125BGB:
Q: What are the wire gauge and conductor cross section of the RLC1-125BGB cable?
A: This cable features an 18 AWG size with a conductor cross section of 0.75 mm².
Q: What is the maximum current the RLC1-125BGB power cable can handle?
A: The RLC1-125BGB supports a current capacity of up to 10.4 A.
Q: What type of connector does the RLC1-125BGB cable use for connecting to the motor?
A: This cable utilizes an M23 power connector for motor connection.
Q: How many bending cycles is the RLC1-125BGB motor power cable rated for?
A: The cable is designed for 5,000,000 bending cycles, ensuring high endurance in flexible applications.
Q: What is the operating temperature range for the RLC1-125BGB cable?
A: It can operate in environments with temperatures ranging from -30°C to 40°C.
