RLC1-024ECB Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat RLC1-024ECB is a power cable from the RLC1 Motor Power Cables series designed with a basic cable configuration of 4 power cores and 4 auxiliary cores. It features a power conductor cross section of 2.5 mm², supports up to 22.6 Amps, and is compatible with ML3 Motors and IndraDrive controllers.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RLC1-024ECB motor power cable is manufactured by Bosch Rexroth Indramat as part of the RLC1 Motor Power Cables series. In industrial automation it serves as the primary link between a drive controller and its matched motor, carrying mains supply and feedback conductors within one jacket so panel wiring stays compact and electromagnetic interference is contained.
The cable is arranged in a 4x L + 4x 1.0 mm² configuration, meaning four power cores are accompanied by four auxiliary signal cores. Each power conductor has a cross-section of 2.5 mm², which corresponds to a wire size of 14 AWG. With a power core count of 4, phase-to-phase and protective-earth routing is completed without external jumpers, and the assembly can continuously carry up to 22.6 A when installed according to Rexroth guidelines. These electrical parameters allow the cable to operate motors that draw moderate continuous currents while still remaining within the temperature limits of the insulation system.
The auxiliary conductors have a cross-section of 1.0 mm², adequate for brake release or sensor reference lines that accompany the main phases. Integration with IndraDrive/ IndraDrive C/ IndraDrive Mi controllers is supported, giving installers a single part number for multiple cabinet families. Mechanical and electrical matching to ML3 Motors is assured, so commissioning time is reduced when those machines are specified. The cable uses the Basic design variant, which omits additional jacket reinforcements to keep weight and bending force low in dynamic drag-chain routes.
