RLC1-023ECB Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat RLC1-023ECB is part of the RLC1 Motor Power Cables series and features a cross section of 2.5 mm² with an auxiliary core size of 1.0 mm². This Rexroth power cable is designed for a current capacity of 22.6 A and supports maximum acceleration up to 50 m/s². The cable uses 14 AWG wire and the raw cable type is REL0107.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RLC1-023ECB motor power lead is supplied by Bosch Rexroth Indramat as part of the RLC1 Motor Power Cables series. It serves in industrial automation as the dedicated link that transfers three-phase energy from an IndraDrive inverter to a servo or spindle motor. By using matched conductor geometry and a flexible outer jacket, the cable maintains stable impedance and withstands continuous movement inside drag-chain carriers. It is suitable for packaging lines, gantry axes, and material-handling equipment where consistent current delivery and controlled electromagnetic emissions are required.
The primary copper conductors provide a cross-sectional area of 2.5 mm², which limits voltage drop over typical axis lengths while keeping the overall diameter compact. This conductor size corresponds to 14 AWG, matching the clamping range of standard Rexroth motor connectors. The assembly supports a continuous current of up to 22.6 A, allowing midrange motors to reach rated torque without exceeding conductor temperature limits. Its mechanical components tolerate dynamic acceleration peaks of 50 m/s². This capacity helps the cores remain stable during rapid start-and-stop motion in high-speed machines. The bulk cable reference is REL0107, identifying the approved combination of insulation and copper conductors used for cut lengths.
An auxiliary pair with a cross-sectional area of 1.0 mm² is routed alongside the power cores to carry brake-release or sensor-supply power without sharing the higher-current paths. The product is a Rexroth Power Cable designed for mechanical and electrical compatibility with Indramat drive systems. The cable uses the Basic design grade, which does not include additional shielding or cooling tubes and allows straightforward jacket stripping during field termination. Separating the auxiliary pair from the primary conductors supports orderly termination at the drive and motor connections. The flexible jacket also accommodates repeated travel through drag-chain carriers while protecting the enclosed conductors from routine mechanical stress.
